- What is an in running nip point?
- Do fan blades require guards?
- What are the two classifications of moving parts that present a hazard?
- What guards are OK to remove on machine?
- What are the four motions of cutting?
- What are the principles of machine guarding?
- Which parts of machines that use abrasive wheels?
- What is the main purpose of machine guarding?
- How many basic types of safeguards are there?
- What are the two types of guard?
- What do Guards do to protect the worker quizlet?
- When can safety guards be removed?
- What is machinery hazard?
- What is a barrier guard?
- What are the different types of guards?
- What are the three primary categories of machine guarding?
- What are safeguards?
- What are the examples of mechanical hazards?
What is an in running nip point?
In-running nip points (or pinch points) are a special danger arising from rotating or reciprocating parts.
They occur whenever machine parts move toward each other or when one part moves past a stationary object..
Do fan blades require guards?
As stated in your letter, the Occupational Safety and Health Administration’s (OSHA) standard at 29 CFR 1910.212(a)(5) requires employers to protect employees from exposed fan blades. If working with or near equipment exposes an employee to a hazard, in this instance, fan blades, then guards must be provided.
What are the two classifications of moving parts that present a hazard?
These can include reciprocating, rotating, and transverse moving parts, as well as feed mechanisms and auxiliary parts of the machine. A wide variety of mechanical motions and actions may present hazards to the worker.
What guards are OK to remove on machine?
Interlocking guards, also known as barrier guards, automatically shut off or disengage the power source when the guard is open or removed. These are particularly useful in situations where operators need to be able to open the guard or access the guarded parts of the machine, such as when clearing jams.
What are the four motions of cutting?
Cutting action may involve rotating, reciprocating, or transverse motion.
What are the principles of machine guarding?
Points of Operation. The point is that location where an operation. … Points of Operation.Power Transmission Devices. The components. … Power Transmission Devices.All Other Moving Parts. All hazardous parts which move while the machine is working. … Guards. Fixed. … Devices. Presence Sensing. … Location/Distance.More items…
Which parts of machines that use abrasive wheels?
Which parts of machines that use abrasive wheels must be protected by safety guards? Machines that use abrasive wheels must have safe guards that protect the spindle end, nut, and flange projections area to prevent injuries.
What is the main purpose of machine guarding?
The purpose of machine guarding is to protect the machine operator and other employees in the work area from hazards created during the machine’s normal operation. This would include hazards of concern such as: ingoing nip points, rotating parts, reciprocating, transversing, and/or flying chips & sparks.
How many basic types of safeguards are there?
Safeguards can be grouped under five general classifications: guards, devices, safety controls, gates and location/distance.
What are the two types of guard?
The guard may be one of two types, interior guard (part two) or exterior guard (part three). An interior guard is detailed by commanders of military installations to protect property and en- force specific military regulations.
What do Guards do to protect the worker quizlet?
Guards provide physical barriers that prevent access to danger areas. Safeguarding devices either prevent or detect operator contact with the point of operation or stop potentially hazardous machine motion if any part of an individual’s body is within the hazardous portion of the machine.
When can safety guards be removed?
Guards attached to mechanical equipment protect you from the moving parts of machines. Machine guards must never be removed and if a guard is damaged or missing, the machine must not be used until it can be repaired or replaced. A missing or damaged guard must be reported at once.
What is machinery hazard?
Hazards associated with working near or on machinery vary depending on the exact machine used but can include exposure to: moving parts (e.g., risk of injuries from entanglement, friction, abrasion, cutting, severing, shearing, stabbing, puncturing, impact, crushing, drawing-in or trapping, etc.)
What is a barrier guard?
Barrier Guards. Barrier Guards are appropriate safeguards for full revolution and part revolution mechanical power presses. They are designed to keep the operator’s hands and arms from entering the “danger zone” as prescribed by the particular machine.
What are the different types of guards?
There are four general types of guards:Fixed.Interlocked.Adjustable.Self-adjusting.
What are the three primary categories of machine guarding?
They are:Guards – these are physical barriers that prevent contact. … Devices – these limit or prevent access to the hazardous area. … Automated Feeding and Ejection Mechanisms – These eliminate the operator’s exposure to the point of operation while handling stock (materials).More items…
What are safeguards?
It’s a word that’s been assigned to a complex set of ideas.” In a nutshell, safeguards help to ensure that, at the very least, a project doesn’t inadvertently harm people or the environment. Safeguards help to ensure that, at the very least, a project doesn’t inadvertently harm people or the environment.
What are the examples of mechanical hazards?
Mechanical hazards include:Crushing.Shearing.Cutting or severing.Entanglement.Drawing-in or trapping.Impact.Stabbing or puncture.Friction or abrasion.More items…•